Everything about R32 New York City Subway Car totally explained
The
R32 is a
New York City Subway car model built in 1964 by the
Budd Company in
Philadelphia for the
IND/
BMT B divisions. These cars were the first mass-produced
stainless steel cars built for the New York City Subway. Their horizontally ribbed, stainless exteriors earned the cars the nickname
Brightliners. They are the oldest subway cars in use today.
The designation R32 is derived from the contract number under which the cars were purchased. They were originally assigned to the BMT Southern Division service only, initially on the
Brighton Line express service (train) and the
Sea Beach Line train, later seeing service on the
West End Line (and TT trains).
The R32 contract was divided into two subcontracts of 300 cars each: the R32's and R32A's. The R32A's were funded through the proceeds of a revenue bond while the R32's were paid for out of the 1963-64 New York City capital budget. The two subcontracts differed only in interior lighting (R-32 Interior Lighting:
(External Link
), R-32A Interior Lighting featuring backlit ad-signs
(External Link
)).
In 1963, the
New York City Transit Authority (NYCTA) contracted with Budd for 600 IND/BMT cars (300 pairs), to replace older equipment, including the BMT
D-type (Triplex) articulated cars. Budd had bid on previous contract with the NYCTA, but had never won a City contract for a production run of cars until the R32s, as Budd built only stainless-steel equipment, and the TA refused to allow a differential in competitive bids for this higher-quality construction.
Budd won the contract by offering the lowest bid of $117,000 per car. Budd low-balled the price to win the contract and introduce stainless steel equipment to the modern
New York City subway system, a plan that met with limited success. NYCTA allowed a premium for subsequent stainless steel contracts, and all subsequent subway equipment was at least partly stainless construction. However, the Budd Company never benefited from the change, as Budd failed to win further contracts from the NYCTA and the company has since halted production of railroad cars.
Four of these cars (3946-3949) were equipped with Pioneer trucks using disk brakes. The trucks were later replaced with standard trucks in 1976.
(External Link
)(External Link
)(External Link
)(External Link
)(External Link
)(External Link
)
In 1987 to 1990 the R32 cars were rebuilt by
Morrison Knudsen at its shops in
Hornell, New York. Ten R32 cars, which have since been retired, were rebuilt by
General Electric in its
Buffalo, New York facility. During the rebuilding process, the route and destination rollsigns located above the storm doors were removed and replaced with
flipdot electronic route signs. The distinctive marker lights were also removed.
The R32s are numbered 3350-3949. One car, numbered 3348, lost its even-numbered mate in an accident, so it was renumbered.
After their refurbishment, R32 and R32A cars were renamed R32 Phase I, R32 Phase II and R32 GE. The R32 Phase I cars (re-built by Morrison Knudsen) have WABCO Air Brake packages, GE Master Controllers (Throttle) and Thermo King HVAC units. The R32 Phase II cars (also re-built by Morrison Knudsen) have NY Air Brake equipment, Westinghouse Master Controllers and Stone Safety HVAC units. Since the cars were sent out to be overhauled based on how poorly they were performing (bad cars first) there are regular R32s and R32As which are Phase I and Phase II. There are also about a dozen or more pairs which are comprised of R32 and R32A mixes. The R32 GE's are slightly different from their Phase I and II brothers in the fact that they still retain their original traction motors, feature backlit ad signs and their Bulkhead designs differ somewhat.
R32GE
R32 Phase I, II
Today, the R32s continue to provide service 43 years after their introduction, despite a nominal design service life of 35 years. It is possible that the R32s will endure past 2010. Their durable stainless construction will be a factor, demonstrating that a premium for such construction was warranted. They run primarily on the, and lines but sometimes make appearances on the and lines. Cars on the
A and
C are sometimes coupled with
R38 to form an eight-car (for the C) or ten-car (for the A) train consist
(External Link
)(External Link
).
The incoming R160 fleet will replace some or all of the R32 fleet. The 10 GE rebuilt R32s have been retired, as have some Phase II MK Rebuilds.
R-32 "Brightliners" Specifications
| Car builder |
Budd Company, Philadelphia, PA, USA |
| Car body |
Stainless steel |
| Unit numbers (Including R32A) |
3350-3949 (3659 renumbered to 3348) |
| Fleet size |
600 (Some Retired) |
| Car dimensions |
Length: 60 feet, 21⁄2 inches (18.35 m) |
| |
Width: 10 feet (3.05 m) |
| |
Height: 12 feet, 15⁄8 inches (3.70 m) |
| Car weight |
(Post Rebuild) 79,930 lbs (36,256 kg); (Pre-Rebuild) Approx. 70,000 lbs (31,752 kg) |
| Track gauge |
4 feet, 81⁄2 inches (1435 mm) |
| Propulsion system |
General Electric SCM 17KG192E3, DC Motors |
| Motors (Four per car) |
Westinghouse 1447JR, GE 1257E1, Power: 115 horsepower (86 kW) (MK rebuild)WH 1447J/JR, GE 1257F, Power: 100 horsepower (75 kW) (GE rebuild) (Retired)
|
| Braking system |
WABCO RT2 "SMEE" braking system |
| Seating capacity |
50 |
| Cab Arrangement |
Half-width conductor/operator cab at "A" end, half-width conductor cab at "B" end |
| Air Conditioning System: |
Two Stone Safety or Thermo King HVAC units each car. |
| Cost per new car |
US$114,951 (1964) |
Further Information
Get more info on 'R32 New York City Subway Car'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://r32__new_york_city_subway_car.totallyexplained.com">R32 (New York City Subway car) Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |